Comparisons & Equations - Grade 9 Science Term 1 | Ekhtebaraty
Comparisons & Equations

Comparisons & Equations for Science

Grade 9 (3rd Preparatory) - First Term

Comprehensive collection of all comparisons, chemical equations, and mathematical formulas

Unit 1 Unit 2 Unit 3 Unit 4
Unit 1: Chemical Reactions and Their Environmental Impacts U1

Comparisons

Comparison Between Types of Substitution Reactions
Simple Substitution: A more active element replaces a less active element in one of its compounds (such as metals reacting with acids). Double Substitution: A double exchange between the ions of two compounds to form two new compounds (such as neutralization and precipitation reactions).
Comparison Between Complete and Incomplete Combustion
Complete Combustion: Occurs in an abundance of oxygen, produces a blue flame, yields \( \mathrm{CO_2} \) and water vapor, and releases higher thermal energy. Incomplete Combustion: Occurs when oxygen is insufficient, produces a smoky yellow flame, yields carbon monoxide \( (\mathrm{CO}) \) or soot \( (\mathrm{C}) \) and water vapor, and releases less energy.
Comparison Between Types of Smoking
Traditional Smoking: Relies on burning tobacco leaves and producing dense smoke. Electronic Smoking (Vaping): Relies on heating a liquid containing nicotine to produce vapor. Active (Direct) Smoking: Intentional inhalation of smoke by the smoker. Passive (Secondhand) Smoking: Inhalation by non-smokers of smoke emitted from others' cigarettes (more dangerous due to the absence of a filter).
Comparison Between Oxidizing Agent and Reducing Agent
Oxidizing Agent: The substance that gains electrons during a reaction (is reduced). Reducing Agent: The substance that loses electrons during a reaction (is oxidized).

Chemical Equations

Combustion of Magnesium $$2\mathrm{Mg}_{(s)} + \mathrm{O}_{2(g)} \xrightarrow{\Delta} 2\mathrm{MgO}_{(s)}$$
Combustion of Iron $$3\mathrm{Fe}_{(s)} + 2\mathrm{O}_{2(g)} \xrightarrow{\Delta} \mathrm{Fe}_3\mathrm{O}_{4(s)}$$
Heating Copper $$2\mathrm{Cu}_{(s)} + \mathrm{O}_{2(g)} \xrightarrow{\Delta} 2\mathrm{CuO}_{(s)}$$
Decomposition of Mercury(II) Oxide $$2\mathrm{HgO}_{(s)} \xrightarrow{\Delta} 2\mathrm{Hg}_{(l)} + \mathrm{O}_{2(g)}\uparrow$$
Decomposition of Calcium Carbonate $$\mathrm{CaCO}_{3(s)} \xrightarrow{\Delta} \mathrm{CaO}_{(s)} + \mathrm{CO}_{2(g)}\uparrow$$
Magnesium with Hydrochloric Acid $$\mathrm{Mg}_{(s)} + 2\mathrm{HCl}_{(aq)} \rightarrow \mathrm{MgCl}_{2(aq)} + \mathrm{H}_{2(g)}\uparrow$$
Sodium with Water $$2\mathrm{Na}_{(s)} + 2\mathrm{H}_2\mathrm{O}_{(l)} \rightarrow 2\mathrm{NaOH}_{(aq)} + \mathrm{H}_{2(g)}\uparrow + \text{Heat}$$
Zinc with Copper(II) Sulfate $$\mathrm{Zn}_{(s)} + \mathrm{CuSO}_{4(aq)} \rightarrow \mathrm{ZnSO}_{4(aq)} + \mathrm{Cu}_{(s)}\downarrow$$
Neutralization Reaction (Acid + Alkali) $$\mathrm{NaOH}_{(aq)} + \mathrm{HCl}_{(aq)} \rightarrow \mathrm{NaCl}_{(aq)} + \mathrm{H}_2\mathrm{O}_{(l)}$$
Acid with Sodium Carbonate $$\mathrm{Na}_2\mathrm{CO}_{3(s)} + 2\mathrm{HCl}_{(aq)} \rightarrow 2\mathrm{NaCl}_{(aq)} + \mathrm{H}_2\mathrm{O}_{(l)} + \mathrm{CO}_{2(g)}\uparrow$$
Precipitation Reaction (Silver Nitrate + Sodium Chloride) $$\mathrm{AgNO}_{3(aq)} + \mathrm{NaCl}_{(aq)} \rightarrow \mathrm{NaNO}_{3(aq)} + \mathrm{AgCl}_{(s)}\downarrow$$
Oxidation Half-Reaction (for Zinc) $$\mathrm{Zn} \rightarrow \mathrm{Zn}^{2+} + 2e^-$$
Reduction Half-Reaction (for Copper Ion) $$\mathrm{Cu}^{2+} + 2e^- \rightarrow \mathrm{Cu}$$
Magnesium with Bromine $$\mathrm{Mg}_{(s)} + \mathrm{Br}_{2(l)} \rightarrow \mathrm{MgBr}_{2(s)}$$
Combustion of Carbon $$\mathrm{C}_{(s)} + \mathrm{O}_{2(g)} \xrightarrow{\Delta} \mathrm{CO}_{2(g)}$$
Complete Combustion of Methane $$\mathrm{CH}_{4(g)} + 2\mathrm{O}_{2(g)} \xrightarrow{\Delta} \mathrm{CO}_{2(g)} + 2\mathrm{H}_2\mathrm{O}_{(v)} + \text{Heat}$$
Incomplete Combustion of Methane (Producing CO) $$2\mathrm{CH}_{4(g)} + 3\mathrm{O}_{2(g)} \xrightarrow{\Delta} 2\mathrm{CO}_{(g)} + 4\mathrm{H}_2\mathrm{O}_{(v)} + \text{Heat}$$
Incomplete Combustion of Methane (Producing Soot) $$\mathrm{CH}_{4(g)} + \mathrm{O}_{2(g)} \xrightarrow{\Delta} \mathrm{C}_{(s)} + 2\mathrm{H}_2\mathrm{O}_{(v)} + \text{Heat}$$
Unit 2: Electricity and Magnetism U2

Comparisons

Comparison Between Electric Cell Connections (Batteries)
In Series: The positive pole of the first is connected to the negative pole of the second; the total electromotive force equals the sum of the emfs of the cells. In Parallel: Positive poles are connected together and negative poles together; the total electromotive force equals the emf of one cell.
Comparison Between Identical Resistor Connections
In Series: Single path for current, current is equal and voltage divides, equivalent resistance is large \( (R' = N \times R) \). In Parallel: Branched paths, voltage is equal and current divides, equivalent resistance is small \( (R' = R/N) \).
Comparison Between Ammeter and Voltmeter
Ammeter: Measures current intensity, connected in series, unit is the Ampere. Voltmeter: Measures potential difference or electromotive force, connected in parallel, unit is the Volt.
Comparison Between Electric Generator and Electric Motor
Generator (Dynamo): Converts mechanical (kinetic) energy into electrical energy. Motor: Converts electrical energy into mechanical (kinetic) energy.
Comparison Between Permanent Magnet and Electromagnet
Permanent Magnet: Retains its magnetism continuously. Electromagnet: A temporary magnet that loses its strength when the electric current is disconnected.
Comparison Between Direct Current and Alternating Current
Direct Current (DC): Flows in one constant direction (such as batteries). Alternating Current (AC): Reverses its direction periodically (such as household electricity).

Mathematical Equations

Electric Current Intensity $$I = \dfrac{Q}{t}$$
Where \( Q \) is the electric charge in coulombs, and \( t \) is time in seconds
Electric Potential Difference $$V = \dfrac{W}{Q}$$
Where \( W \) is the work done in joules
Ohm's Law $$V = I \times R$$
Where \( R \) is resistance in ohms
Fixed Resistance $$R = \dfrac{V_2 - V_1}{I_2 - I_1}$$
Equivalent Resistance (Series) $$R' = N \times R$$
Equivalent Resistance (Parallel) $$R' = \dfrac{R}{N}$$
Electric Power $$P = \dfrac{E}{t}$$
Where \( E \) is consumed energy in joules, and power is measured in watts
Consumed Electrical Energy $$E = P \times t$$
Energy (J) = Power (W) × Time (s)
Converting Kilowatt-Hour to Joules $$1 \text{ kW}\cdot\text{h} = 3.6 \times 10^6 \text{ J}$$
Calculating Consumption Cost $$\text{Energy} = \text{Power} \times \text{Time}$$ $$\text{Cost} = \text{Energy} \times \text{Unit Price}$$
Electromotive Force (Series) $$\epsilon_{\text{total}} = N \times \epsilon_{\text{cell}}$$
Electromotive Force (Parallel) $$\epsilon_{\text{total}} = \epsilon_{\text{cell}}$$
Unit 3: Diversity of Traits in Living Organisms U3

Comparisons

Comparison Between Natural Selection and Artificial Selection
Natural Selection: The influencing factor is the environment, aims for survival and adaptation, and occurs over very long periods of time. Artificial Selection: The influencing factor is humans, aims to achieve economic benefits, and occurs in a relatively shorter time.
Comparison Between Genotype and Phenotype
Genotype: The types of alleles an individual carries (such as \( \mathrm{BB} \) or \( \mathrm{Bb} \)). Phenotype: The externally visible trait (such as brown eye color).
Comparison Between Dominant Allele and Recessive Allele
Dominant Allele: Its effect appears clearly in the visible trait even in the presence of another allele. Recessive Allele: Its effect disappears completely when the dominant allele is present.
Comparison Between Population and Biological Community
Population: Individuals of a single species living in a specific place and time. Biological Community: All the different populations living together in one area.
Unit 4: History of Planet Earth U4

Comparisons

Comparison Between Relative Dating and Absolute Dating
Relative Dating: Determines whether a rock is older or younger (ordering events); relies on the Law of Superposition and index fossils. Absolute Dating: Determines the actual age in years; relies on radioactivity (half-life).
Comparison Between Types of Fossils
Trace Fossil: Indicates the activity of a living organism (footprints, burrows). Solid Cast: Represents the internal details of an organism after it decays and the cavity fills with sediments. Mold (Imprint): Represents the external details of the structure in rocks.
Comparison Between Index Fossils and Transitional Fossils
Index Fossils: Lived for a short time span and a wide geographic range (used to determine relative age). Transitional Fossils: Represent a link between two groups of organisms (such as Archaeopteryx between reptiles and birds).
Comparison Between Igneous, Sedimentary, and Metamorphic Rocks
Igneous Rocks: Formed from the solidification of magma or volcanic lava. Sedimentary Rocks: Formed from the accumulation of sediments layer upon layer over time. Metamorphic Rocks: Formed when rocks are exposed to extreme pressure and heat.
Visit Ekhtebaraty Website