Interactive Electricity Lab

Learn by experimenting: move the sliders, click the switches, and watch the electric circuit change in real time.

Grade 9 (3rd Prep) 6 Interactive Labs Self-Test with Randomized Questions

Learning Journey

How to Use the Lab

1

Read the Concept and Formula at the top of each lesson.

2

Move the sliders and observe the circuit, and click the switch to open and close it.

3

Select the unknown and solve the problem, then test yourself at the end.

Formulas Summary

Current Intensity

$I = \dfrac{Q}{t}$

Unit: Ampere (A)

Potential Difference

$V = \dfrac{W}{Q}$

Unit: Volt (V)

Ohm's Law

$V = I \times R$

Unit: Ohm (Ω)

Series

$R_t = R_1 + R_2 + \cdots$

Parallel

$\dfrac{1}{R_t} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \cdots$

Electromotive Force

$\varepsilon = V + I \cdot r$

Unit: Volt (V)

Electric Current Intensity

How much charge crosses the conductor every second?

Concept

  • Electric current is the flow of charges (electrons) in a conductor connected to an electric source.
  • Current Intensity: The quantity of electricity (charge) crossing a conductor's cross-section in one second.

Formula

$\color{#fbbf24}{I} = \color{#38bdf8}{\dfrac{Q}{t}}$

Unit: Ampere (A) = Coulomb ÷ second — measured by an Ammeter in series.

Try It Yourself

Notice

Increase charge Q while keeping time constant: I increases, charges flow faster, and the lamp glows brighter. Conventional current direction is from the positive to the negative pole outside the source, whereas electrons move in the opposite direction. And 1000 milliamperes = 1 ampere.

Electric Potential Difference

How much energy does each unit of charge carry?

Concept

  • Potential Difference between two points: The work done to transfer a charge of 1 coulomb between the two points.
  • Analogy: Similar to a difference in water height between two tanks; the greater the difference, the stronger the water flows.

Formula

$\color{#a78bfa}{V} = \color{#34d399}{\dfrac{W}{Q}}$

Unit: Volt (V) = Joule ÷ Coulomb — measured by a Voltmeter in parallel.

Try It Yourself

Notice

The Volt: The potential difference between two points if 1 joule of work is needed to transfer 1 coulomb of charge between them. Notice that charges appear larger and glow brighter as potential difference increases because they carry more energy.

Electromotive Force of the Source

The energy given by the source per coulomb

Concept

  • Electromotive Force (EMF): The work done to transfer a 1 coulomb charge through the entire circuit (inside and outside the source).
  • Equals the potential difference between the source's poles when the circuit is open (no current flows).
  • Its unit is the Volt.

When Circuit Is Closed (Enrichment)

$\color{#10b981}{\varepsilon} = \color{#a78bfa}{V} + \color{#fb923c}{I{\cdot}r}$

The potential difference across the terminals decreases because part of the energy is lost inside the battery itself due to its internal resistance r.

Try It Yourself

Experiment

Open the circuit: the voltmeter reads the full EMF. Close it and increase the internal resistance r and watch the voltmeter reading drop.

Resistance and Ohm's Law

The relationship between potential difference, current intensity, and resistance

Ohm's Law

  • At constant temperature, the current intensity passing through a conductor is directly proportional to the potential difference across its ends.
  • The (V – I) graph is a straight line passing through the origin, and its slope = resistance.

Formula

$\color{#a78bfa}{V} = \color{#fbbf24}{I} \times \color{#f87171}{R}$

Unit: Ohm (Ω) = resistance of a conductor carrying 1 ampere at a potential difference of 1 volt.

Solve the Problem

What Factors Affect the Resistance of a Wire?

Wire Lab

Conclude

  • Resistance increases with increasing length L (direct relationship).
  • Resistance decreases with increasing cross-sectional area A (inverse relationship).
  • It also depends on the type of material (resistivity ρ) and temperature; the resistance of metals increases as their temperature rises.

Series Connection

One path for the current

Properties

  • Current intensity is the same through all resistors.
  • Total potential difference = sum of potential differences: V = V₁ + V₂ + V₃
  • If any part is disconnected, the current stops in the entire circuit.

Equivalent Resistance

$R_t = R_1 + R_2 + R_3$

The equivalent resistance is greater than the largest resistor in the group.

Click on the switch inside the diagram to open and close the circuit.
Distribution of the source's potential difference across resistors: the larger the resistance, the larger its share.
Try It Yourself
Number of resistors:

Parallel Connection

More than one path for the current

Properties

  • Potential difference is the same across all branches.
  • Total current = sum of branch currents: I = I₁ + I₂ + I₃
  • If one branch is disconnected, the other branches continue operating.

Equivalent Resistance

$$\dfrac{1}{R_t} = \dfrac{1}{R_1} + \dfrac{1}{R_2} + \dfrac{1}{R_3}$$

The equivalent resistance is smaller than the smallest resistor. For two resistors: $R_t = \dfrac{R_1 \times R_2}{R_1 + R_2}$

Click on any branch's switch inside the diagram to disconnect it and observe the currents.
Try It Yourself
Number of branches:

Notice

The branch with the smallest resistance carries the largest current. Whenever you add a new branch, the equivalent resistance decreases and the total current increases.

Test Yourself

10 new questions every time — including problems with randomized numbers