Questions
& Answers
Unit 2: Electricity and Magnetism
A comprehensive summary of the unit in the form of questions and answers with all equations
Lesson 1: Electric Current
What is the scientific concept of electric current, and how does
it arise?
Electric current is the flow of electric charges (free electrons)
through
metallic conductors (wires) along a continuous path. It arises due to the presence
of an electric source (a battery) that pushes
these electrons to move in one direction through the closed circuit.
How do we define "electric current intensity" $(I)$ and how is it measured?
It is the amount of electric charge passing through a cross-section
of the conductor in one second.
Unit of measurement: the ampere $(\mathrm{A})$.
Device used: the ammeter, connected
in
the circuit in series.
$$I = \dfrac{Q}{t}$$
What is the difference between potential difference $(V)$ and electromotive force $(\varepsilon)$?
Potential difference: it is the work
done to transfer
a charge of $(1 \text{ C})$ between
two points in
the circuit.
Electromotive force: it is the total work done by the
source to transfer
the charge through the entire circuit (inside and outside the source).
Both are measured in volts $(\mathrm{V})$ using a
voltmeter connected in parallel.
$$V = \dfrac{W}{Q}$$
Compare the ways of connecting electric cells (batteries).
Series connection: the positive terminal of the first
is connected to the negative
of the second; the goal is to obtain a greater electromotive force
(the sum of the cells' emfs).
Parallel connection: the positive terminals are
connected together
and the negative terminals together; the goal is to obtain an emf equal to
that of one cell
but for a longer period of time.
$$\varepsilon_{\text{total}} = N \times
\varepsilon_{\text{cell}}$$
$$\varepsilon_{\text{total}} =
\varepsilon_{\text{cell}}$$
What is "electrical resistance" $(R)$ and what factors affect it?
It is the opposition that the current encounters while passing
through the conductor, and it is measured in
ohms $(\Omega)$. Resistance increases with an increase in
wire length
and a decrease in cross-sectional area; it is also affected by the
type of wire material and its temperature.
Lesson 2: Electric Circuits
Explain the statement of Ohm's law and its mathematical
relationship.
The law states that "the current intensity
passing through
a conductor is directly proportional to the potential difference across its ends
at constant temperature".
Graphically it is represented by a straight line passing through the origin, and the
slope of the line represents the value of the constant resistance.
$$V = I \times R$$
What is the difference between connecting resistors in series and
in parallel?
Series: the same current passes through all the
resistors, the potential is distributed,
and the equivalent resistance increases.
Parallel: the current is distributed, and the
potential is equal across the ends
of each resistor, and the equivalent resistance decreases.
$$R' = N \times R$$
$$R' = \dfrac{R}{N}$$
Give a reason: appliances and lamps in homes are connected in
parallel.
So that each appliance works on an independent path at a constant
potential; if one appliance breaks or
is switched off, the other appliances keep working and the circuit is not
interrupted.
Define "electric power" $(P)$ and how is the consumed energy calculated?
Power: it is the rate at which the
device consumes
energy per second, and it is measured in watts $(\mathrm{W})$.
Energy $(E)$: power × time.
At home it is measured in kilowatt.hour $(\text{kW}\cdot\text{h})$.
$$P = \dfrac{E}{t}$$
$$E = P \times t$$
$$1 \text{ kW}\cdot\text{h} = 3.6 \times
10^6 \text{ J}$$
What is the importance of the "energy efficiency label" affixed
to appliances?
It shows the appliance's level of efficiency in consuming
electricity; the green arrow (A) indicates that the
appliance is the most efficient and consumes the least
energy.
All equations of
Lesson
2:
$$V = I \times R$$
$$R = \dfrac{V_2 - V_1}{I_2 - I_1}$$
$$R' = N \times R$$
$$R' = \dfrac{R}{N}$$
$$P = \dfrac{E}{t}$$
$$E = P \times t$$
$$1 \text{ kW}\cdot\text{h} = 3.6 \times
10^6 \text{ J}$$
Lesson 3: Electric and Magnetic Forces
What was the discovery of the scientist "Hans Oersted" regarding
electric current?
He discovered that an electric current passing through a wire
generates a magnetic field around it, and he inferred
this from the deflection of a compass needle
when placed near the wire.
Explain the structure of an "electromagnet" and how to increase
its strength.
It consists of a coil of insulated copper wire surrounding a core
of soft iron. It gains magnetism when the current
passes and loses it
when the current is cut off (a temporary magnet). Its strength increases with an
increase in the number of turns of the coil or an increase in
the current intensity passing through it.
What is the operating principle of the "electric motor"?
Converting electrical energy into kinetic
energy. It relies on the generation of a "torque" that causes the
rotation of a coil carrying a current placed between
the poles of a magnet. Its applications include: the fan, the blender, and the
metro.
What is the function of the "electric generator" (dynamo) and its
operating principle?
Converting mechanical (kinetic) energy into
electrical
energy. It works by moving a coil inside a magnetic field, which causes
it to cut the field lines
and generate an electromotive force.
Mention the most important security and safety precautions when
dealing with electricity.
1. Avoid overloading sockets to prevent fires. 2. Make sure the
wires are well
insulated. 3. Keep hands and tools dry before use because water is a conductor. 4.
Completely disconnect the source
before replacing any component in the circuit.
All equations of
Lesson
3:
$$\varepsilon_{\text{total}} = N \times
\varepsilon_{\text{cell}}$$
$$\varepsilon_{\text{total}} =
\varepsilon_{\text{cell}}$$
Summary of all equations of Unit 2
$$I = \dfrac{Q}{t}$$
$$V = \dfrac{W}{Q}$$
$$V = I \times R$$
$$R = \dfrac{V_2 - V_1}{I_2 - I_1}$$
$$R' = N \times R$$
$$R' = \dfrac{R}{N}$$
$$P = \dfrac{E}{t}$$
$$E = P \times t$$
$$1 \text{ kW}\cdot\text{h} = 3.6 \times 10^6
\text{ J}$$
$$\varepsilon_{\text{total}} = N \times
\varepsilon_{\text{cell}}$$
$$\varepsilon_{\text{total}} =
\varepsilon_{\text{cell}}$$